
- NTN DRIVESHAFT ANDERSON, INC.
- Angular Contact Ball Bearings Bearing Units Cylindrical Roller Bearings
- Address3587 South Layton Road Anderson Indiana 43241, U.S.A.
- Phone(Working Time)329-699-8621
Angular Contact Ball Bearings
Contact NowAngular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. The standard contact angle used by NTN is 30° but, in many cases, a 40° contact angle can also be specified. We also offer special high-speed bearings with phenolic resin cages with a 15° contact angle.
Double row angular contact ball bearings have an inner and outer ring with a double raceway. The two rows are so related that the contact angle is similar to a pair of back-to-back single row bearings. NTN’s 5200 and 5300 series offer continuous races and can carry thrust loads in either direction. The 3200 and 3300 series have filling slots, so it is necessary to mount them with the thrust load acting against the un-notched face of the rings.
40 mm x 68 mm x 15 mm SKF 7008 ACD/P4AH angular contact ball bearings
4500 r/min | 163.512 mm |
187.325 mm | 225.425 mm |
20 mm x 52 mm x 15 mm KBC 7304B angular contact ball bearings
5 in | 717905123160 |
35000 | 1-3/4 in |
45 mm x 85 mm x 19 mm SIGMA 7209-B angular contact ball bearings
8-11/16 in | Top Angle |
35-1/2 in | 2-3/16 in |
30 mm x 72 mm x 19 mm SKF QJ 306 N2PHAS angular contact ball bearings
4.7813 in | Single Cup |
34300, 34306, 34275, | Non-Flanged Cup |
40 mm x 62 mm x 12 mm KOYO 7908CPA angular contact ball bearings
105 mm | 2640 kgf |
Four-Bolt Piloted | 35 mm |
900,000 mm x 1180,000 mm x 122,000 mm NTN SE18002 angular contact ball bearings
W 22 | 23.012 mm |
101.6 mm | 110.185 mm |
20 mm x 42 mm x 12 mm FAG HS7004-C-T-P4S angular contact ball bearings
8865590321353 | 1/2 in |
R-Seal | Eccentric Collar |
50 mm x 90 mm x 20 mm FAG B7210-E-2RSD-T-P4S angular contact ball bearings
23.825 mm | Double Row Non-Fill |
20.65 mm | 0.9375 in |